If you purchase an independently reviewed item through our site, we earn an affiliate commission. Read our affiliate disclosure.
Wired beehive frames are part of both traditional and modern beekeeping. A wired frame is strong and keeps its foundation straight. Supported foundation is readily accepted by honeybees than other foundation. Wax spur embedders are great for wiring frames. Let us look at the best wax spur embedders and the process of wiring frames with a such a tool.
What is a Wax Spur Embedder?
A wax spur embedder is a tool built in a soldering iron style. It is often heated to make it work better. Wax spur embedders may use electricity for heating or may be heated over a fire. A wax spur embedder has a wheel that hugs the wire in your beehive frame. It pushes the wire into wax foundation and gives you better embedded wire for strong wax foundation. A spur embedder is used for embedding wire into wax foundation onto beehive frames.
Best Wax Spur Embedders
10. e2Wholesale Spur Wheel Wire Copper Embedder
This spur wire embedder is quite low-cost. It is great for beekeepers looking to save costs on the beekeeping equipment they buy. The embedder has a solid tip to embed wire onto wax foundation. It can be heated using an external source of heat since it does not have internal heating mechanism. The embedder has a long shaft that allows you to heat the tip without endangering your hand or the wooden handle of the embedder. This wire embedder is made with a long shaft and rather small handle. It is great with grip but loses you some of the control you have over the movement of the embedder. The embedder has a galvanized iron shaft and threaded copper tip.
The total length of this wire embedder is 24 cm. It is made in China. This embedder comes from a relatively new manufacturer in the beekeeping supplies business. It is simple and minimalist in its design. It shows great craftsmanship even in its minimalist design. Experienced beekeepers are best suited to use this wire embedder. Beginner beekeepers using the embedder may get very poor results or end up damaging their wax foundation. The embedder does not have a wheel so staying with your frame wire while embedding is not easy.Check Price
9. Baosity Spur Wheel Wire Embedder
Baosity is a reliable supplier of sports and outdoor activities’ equipment. The Baosity Spur Wheel Wire Embedder is made of wood and stainless steel. It features a short clevis and long spurs on the spur wheel. The entire spur wire embedder is relatively short to give you excellent control over its movement. It is 17.5cm in total length. This Baosity embedder features a wooden handle and clevis only. It does not have a shaft. The embedder is thus not easy to heat but gets the job done well. The Baosity Spur Wheel Wire Embedder has an ergonomically shaped wooden handle for better grip. It fits into your hand well.
This is a high quality spur wire embedder made with safe and durable materials. It gives beekeepers long service life. The embedder is easy to use and very convenient. Baosity has made the embedder strong and sturdy. It shows great craftsmanship. The embedder easily pushes wire into wax foundation. It is best to use this spur wire embedder on wax that is at room temperature or higher. Since you cannot easily heat the embedder, wax at room temperature gives way for the frame wire easily. Beekeepers of any experience and skill level can use this embedder and get great results.Check Price
8. Leo Pet Supplies Spur Wheel Wire Frame Embedder
Leo Pet Supplies is the manufacturer of this spur wheel embedder. The company is known for its great pet toys and accessories. Leo Pet Supplies has made this spur wheel wire embedder using wood for the handle and stainless steel for the embedder shaft and spur wheel. The embedder has silver and wood colors. Using wood on the handle is a great move by Leo Pet Supplies. It insulates beekeepers using the embedder form any heat that may be applied to the spur wheel. Once heated, the embedder retains heat for sufficient time to allow you embed a frame or two before needing to heat the embedder again.
The handle of this embedder is 2 x 9 cm and the metal shaft is 12cm long. The Leo Pet Supplies Spur Wheel Wire Embedder has a total length of 21cm. The spur wheel utself has a diameter of 1.8cm. These dimensions of the embedder make it suitable for wire embedding in foundation wax.
This spur embedder has its shaft longer than the handle. It keeps heat away from your hands when using the embedder. However, the long shaft makes handling and controlling the embedder a little difficult. Additionally, the wheel on this spur embedder does not have a media groove to align it with frame wire when embedding.Check Price
7. Aexit Spur Wheel Wire Embedder
The Aexit Spur Wheel Wire Embedder is a non-heated embedder. It is built using plastic and metal. The plastic is used on the handle while the shaft is made using stainless steel. It features a brass bit and spur wheel. This combination of materials is great for heat retention when you heat the embedder and insulation for your hands from hot parts of the embedder. The embedder has a long shaft and a nicely shaped handle for excellent grip and control of the embedder. The brass wheel of the embedder rotates well and is grooved in the middle. This makes it easy to follow the wire as you embed it in wax foundation.
This spur embedder has a total length of 23.5cm and weighs 60 grams. It has a handle measuring 11 x 2 cm. The handle is colored orange. At the end of the metal shaft of the embedder is a threaded detachable clevis holding the geared spur wheel. This spur embedder is great for use with heating. It gives good distance between the hot parts and the plastic non-slip handle. The embedder is great for use by beginner beekeepers that are learning how to embed wire into wax foundation. Experienced beekeepers can also use this Aexit Spur Wheel Wire Embedder.Check Price
6. Jinsun Wire Embedder Beekeeping Tool
The Jinsun wire embedder is made of wood and metal. It combines stainless steel, wood and brass into one reliable spur wheel embedder for beekeepers. The spur embedder has a stainless steel shaft and a brass clevis. The spur wheel is made of brass too. This mix of materials is brought together with excellent craftsmanship. The embedder feels solid and is very suited for embedding wire into wax foundation. The wooden handle is small and fits into your hand comfortably. It is also shaped for maximum grip when using the embedder.
This Jinsun wire embedder has a groove round the outer edge of the embedder. This groove is great for beginner beekeepers. The spur wire embedder is 21cm long and has the spur wheel with a diameter of 1.8cm. A long stainless steel shaft is included in the Jinsun wire embedder. It allows you to heat the embedder safely even with a flame. The long shaft keeps heat away from your hands. Unfortunately for this embedder, the long shaft also means some loss of control due to a longer distance between the grip and the spur wheel.Check Price
5. Leo Garden Red Copper Wire Embedder
The red copper wire embedder is made and sold by Leo Garden. It features a wooden handle holding a metal shaft in place. The tip of the shaft has a copper clevis holding a copper spur wheel in place. The wheel has small gear-like teeth and a median groove round its circumference. This clevis is threaded and detachable. The wooden handle of this copper wire embedder is nicely shaped to fit your hand. It gives excellent insulation from the heat that may be conducted by the shaft of the embedder. This embedder does not have a heating element in it so it relies on external heating.
Assembly of the wood handle red copper wire embedder is great. It shows great craftsmanship in all the different parts that come together to make the embedder. The embedder is nicely sized. It is not too long to lose your control, while at the same time it is not too short to put you at risk of suffering burns to your hand. The spur embedder runs smoothly along the wire in your frame and gives excellent results. It is great for use by both amateur and professional beekeepers. The embedder makes it easy to embed wire in many frames within a short period of time.Check Price
4. Uxcell Spur Wheel Wire Embedder
The Uxcell Spur Wheel Wire Embedder is made of plastic and metal. It features a plastic handle that utilizes non-slip plastic to give you excellent grip. The embedder has a bronze metal shaft tipped by a brass clevis and spur wheel. Its overall length is 23.5 cm. It averages a width of 2 cm. The wheel has a diameter of 18 mm. This spur embedder has a groove in the wheel. The groove is great to help you align the embedder with frame wire when embedding. This groove is 1 mm wide. The entire embedder weighs 60 grams only. It is light and easy to control as it moves along frame wide. This embedder is great for use by beginner beekeepers that are yet to get the hand of wire embedding in wax foundation.
This spur wheel wire embedder is well made. The different parts are tight against each other to give the embedder a very solid feel. Spur wheel embedder is a great beekeeping tool to have for all beekeepers. It is not internally heated but works well with any external heat source you may have. This embedder has a nicely sized shaft that allows safe working with the embedder while hot without rising damaging the embedder. Use this embedder to get strong frames with wax foundation.Check Price
3. Leo Pet Supplies Wire Embedder
The Leo Pet Supplies Wire Embedder is made of wood and stainless steel. It is a solid tool with excellent craftsmanship. The spur embedder features a rounded and ergonomically shaped wooden handle and a stainless steel clevis holding a spur wheel in place. Stainless steel is used in making the spur wheel too. This spur wheel embedder fits snugly into your hand and gives you great control over its movement along your frame wire. It is rather short to give you excellent results. The spur wheel embedder is 15 cm long. It has an average width of 4cm and a diameter of 2.8cm. Furthermore, it does not have a groove round its circumference.
The teeth of the spur wheel are rounded to give you a smoother embedding experience. The clevis and spur are 4cm long. This leaves the handle 11cm which is adequate for comfortable grip. You may use this spur wheel embedder while heated or cold. With heating, caution must be taken not to burn the wooden handle. Additionally, be cautious not to grip the hot clevis or wheel. This is a strong and sturdy embedder that works great for both beginner and experienced beekeepers.Check Price
2. Lucky Farm Spur Wire Embedder
The Lucky Farm Spur Wire Embedder is made using a plastic and metal. It is colored yellow on the plastic handle. It is a long-shafted spur wire embedder with a threaded detachable clevis and spur wheel. This embedder is made by Lucky Farm which has considerable experience manufacturing beekeeping and other farming equipment and tools. You are assured of quality and durability with this spur embedder. You can safely apply heat from any source to this embedder. It is not internally heated. The embedder has a long shaft that keeps your heating from affecting the handle. Additionally, the heat rarely reaches your hand to burn you.
This Lucky Farm embedder is 24cm long and has its spur wheel with a diameter of 20mm. This is a wider diameter than most other embedders. It allows beekeepers using the embedder to move quickly along each beehive frame wire. With this embedder, you are able to embed many frames in a short period of time. The Lucky Farm Spur Wire Embedder is a great helper tool for any beekeeper. It is strong, sturdy and well built. The handle even has grooves to improve your grip on the embedder as you work with it.Check Price
1. Dophee Spur Wheel Wire Embedder
The Dophee Spur Wheel Wire Embedder is a simple tool for beekeepers. It is made using wood and stainless steel. The wood makes the handle of the embedder while stainless steel is used in making the spur wheel. It is an embedder that is easy to use and gives you a firm grip. Controlling the embedder is easy as it moves along the frame wire and pushes it into the wax. Both beginner and experienced beekeepers can use this embedder and get great results. The embedder is made by Dophee and is available both online and at beekeeping supplies outlets. Dophee has many products in the accessory range for home and specialized uses. This gives you assurance that the spur embedder is of high quality and well crafted.
This spur embedder is approximately 14cm long and weighs 1.12 ounces. It is not heated internally. You may use an external source of heat on this spur embedder for better results. Additionally, the Dophee Spur Wheel Wire Embedder does not have a wire groove on the spur wheel. The wheel on this embedder rotates with ease in both directions. When heating this embedder, do not subject it to an open flame or excessive heating that may ruin the stainless steel or burn the wooden handle.Check Price
How to Wire and Embed a Beehive Frame
To successfully wire a beehive frame, you need a small hammer, eyelets, bee wire, crimper, nails, and an eyelet punch. For embedding, you need a spur embedder and the wax foundation you will be embedding wire into.
- Installing eyelets – Using an eyelet punch, install eyelets into the sides of your beehive frame. 2 eyelets per side are enough for most beehive frames.
- Installing wire – add wire onto the frame by passing it through the eyelets you installed. Tighten the wire around a small nail in the side of the frame and snip off excess wire.
- Crimping bee wire – Holding the beehive frame vertically, use a crimper to tighten the bee wire on the frame. You should then nail it down to keep it tight.
- Installing foundation – To install foundation, weave the wax foundation through the wire on your beehive frame. The foundation should slide into the groove on the inside of the frame.
- Embed wire – Once the foundation is in place, la the frame on an embedding board. Use the embedding spur you have to push the bee wire into wax foundation. The foundation should be at room temperature for best results.
A Final Word
Using wax spur embedders is an easy and quick way of embedding wire into wax foundation. Wired frames can be stored in an empty beehive box after you have embedded wire into their wax foundation. If you do not have an empty box, stack the frames in an upright position. The best wax spur embedders give you nicely embedded frames and are durable. Beginner beekeepers should not be afraid of embedding wires. After your first few trials, you will get the hang of it and produce nicely embedded frames.
Have you ever used any of these wax spur embedders? Leave a comment below and let us know what you thought of it.